Why Fish Bamboo? 02/16/2012
 
Why fish Bamboo?  Well if you have ever fished Bamboo you don't have to read any further, you know why.  For the unfortunate few who haven't had the opportunity to fish Bamboo, all you can do is listen to a Bamboo addict's ravings.  When you first pick up a Bamboo rod you will immediately notice its warmth.  It's a feel that you just don't get with any other rod.  There is a natural warmth with bamboo just as there is when you are running your hand over a fine piece of hand made furniture.  

Besides the warmth there is a feel you just can't get with other materials.  Bamboo will tell you exactly how it wants to be cast.  Try to overload the rod or cast it faster than it wants to be and you will rewarded with a lousy cast.  But, take a moment to slow down and listen and you will be graced with a fantastic sensation of laying down a beautiful cast with a delicate presentation.  Plus I am willing to bet you will lose fewer fish when you set the hook just due to  feel and the forgiving nature of  bamboo. 

In a nutshell there is nothing better than casting a bamboo rod with a dry fly to a native fish on a secluded stream.  Personally, I am not one who feels the need to catch 60 fish a day, I prefer to enjoy the overall experience.  So if you are a fly fisherman who feels the need to cast and fish at Mach 3  Bamboo probably isn't for you.  I may be bias toward Bamboo rods, but I do challenge you to give Bamboo a try. 

And another thing, don't be afraid of Bamboo.  It isn't nearly as fragile is it would appear.  There isn't any fear of the rod breaking after taking a shot by a weighted fly or a quick tumble down a hill.  One Bamboo builder use to take a section of Bamboo rod and hammer it thru a board when he gave presentations about Bamboo rods.  Try that with graphite!    

When you do get the opportunity to fish a Bamboo rod, really take the time to feel what the rod is telling you.  Trust this Bamboo addict, you will be rewarded with a fishing experience that is second to none.

Until next time my friends,
Pete   
Add Comment
 
 
This is another in a series of Steffen Brothers fiberglass builds I am doing for a customer.  It's built on a Steffen Brothers fiberglass 7 weight, 8'6", 2 piece blank.  Stabilized Maple Burl was used to turn the seat insert for the down-locking hardware.  I also machined the Nickel Silver winding check to emulate the old style winding check found on many older  fiberglass rods.  Difference is, the older winding checks were mainly made out of Aluminum. Used two Amber Agate stripping guides and wrapped everything with Orange/ Black classic twist thread.  Trimmed the guides and signature wrap with two turn Metallic Gold.

If you have never cast a Steffen Brothers fiberglass rod, you owe it to yourself to do so.  As they say: This ain't your Grandpa's old fiberglass.  These rods are very light compared to the older generation glass.  They are very smooth and patient with even the worst casting stroke.  
Until next time my friends,
Pete
Add Comment
 
 
Here are a couple of  Bamboo rods hot off the bench to feed your addiction. 

First is a Blonde 7', 3-4 weight.  This is my favorite taper.  It is a great roll casting rod, but it will also lay out quite a bit of line without too much effort.  Machined the seat out of aluminum and turned the insert out of a piece of Box Elder burl.  Handle is a reverse half wells made to fit the smaller rod size. Wraps are Persall's Gossamer Antique Gold with black trim wraps.  Stripping guide is a medium colored Agate.
Second Bamboo is a Blonde 8', 5 weight.  Machined the reel seat insert out of Olive wood with some great color in it.  Wraps are YLI silk with Persall's Gossamer black trim wraps.  Stripping guide is a red banded Agate.  Machined the winding check to flow with the handle.  This rod feels really good in the hand and tells you exactly how it wants to be treated.

Hope you enjoyed looking at them as much as I did building them.

Until next time my friends,
Pete
Add Comment
 
 
This is what came out of that Pile "O" Parts in the last entry.  Turned the reel seat handle out of a chunk of Olive wood.  Went with a simple cork handle, custom hook keeper, and white alignment dots.  The guide wraps are Garnet with Color Preserver.  Stayed fairly conservative with the Pink.  Used the Pink for the two turn trim wraps and three turn alternating wraps on the stripping guide.  I really hope the Casting for Recovery participant enjoys it. 
Please support CFR in any way you can. Thank you.

Until next time my friends,
Pete
Add Comment
 
Pile "O" Parts 01/11/2012
 
Picture

Thought I would give you a look at how some  custom builders start a build.  In this case this is a graphite rod to be donated to the Southern California chapter of "Casting for Recovery" (CFR)  So there will be some pink highlights on the rod.  Basically we start with the blank, guides, tip top, cork, seat hardware, winding check and in this case a chunk of Olive.

A custom handle will be made by gluing up different types of cork.  The Olive wood will be turning  down for the reel seat insert.  Unfortunately I will not be machining any wedding band hardware for this rod.  For 4 weight rods and up I usually go with locking hardware, up-locking in this case.

The goal on this rod is to not let the pink highlights overwhelm the rod.  To quote a breast cancer survivor "If I ever get another pink item, I think I will scream".   Hearing her say that prompted me to tone down my urge to build a PINK rod.  Too much of something is not always a good thing.

Check back in a couple of weeks to see how the "Casting for Recovery" rod turns out.  And please support CFR in any way you can.  The Southern California chapter of CFR is just getting set to fire up in 2012.  The survivors needs all the support they can get.  Check em out at:  http://castingforrecovery.org/wordpress/?page_id=5519. 

Until next time my friends,
Pete
Add Comment
 
 
Some things in life and fly fishing, you just want to keep to your self.  Well.... Sierra Nets isn't one of them.  Greg makes the most beautiful landing nets around.  Each one is a work of art and should probably be displayed as art instead of getting fish slime all over it.  But, as with any prime fishing equipment, it needs to be used for its intended purpose.

Greg has recently been featured in "Western Outdoor News"  If you can't get a copy of it check out writer Jim Matthews web site for the write up.
http://www.outdoornewsservice.com/index.php?option=com_k2&view=item&id=311:these-functional-fishing-nets-are-also-pieces-of-art&Itemid=18

Its good to see an artisan of Greg's calibur get the recognition he so justly deserves.  Check out Greg's web site and get on his waiting list.   Like a fine Bamboo rod, Greg's nets are heirloons that will surely be passed down thru the generations. http://www.sierra-nets.com/CMS-Sierra/
Until next time my friends,
Pete
Add Comment
 
The Studio 01/02/2012
 
Thought I would start the new year off right and give you a quick look at the home of "Renaissance Rods" .  I don't consider it a shop, I consider it a studio.  I feel that myself and many other custom rod builders are Artisans, not just rod assemblers.  So I dubbed it "The Studio".

I was fortnuately able to keep much of the old lumber from a late 1800s constructed  building I dismantled for a friend.  That lumber went into "The Studio" giving it instant character.  It was a great project for me.  I was able to build the entire shop, including the pine cabinets, without any assistance, so I can really call her my own.

"The Studio" has one purpose and that  is to be devoted entirely to fly fishing.  When not building rods, the studio is used for fly tying.  As I told the wife "Fly fishing only, no household storage and no girly curtains on the windows." 
Thanks for checking out "The Studio".  If you are ever on the Central Coast of California, shoot me an e-mail and stop by for a tour and a cold beverage

Until next time my friends,
Pete
Add Comment
 
 
Picture
Remember when I talked about selecting your builder?  I mentioned having a rough idea of what you would like.  Ring a bell?  Here is an example of what I was talking about.  The customer commissioned a Steffen Brothers 7 weight fiberglass rod.  He knew he wanted a Reverse Half-wells handle necked down to flow into a down locking Nickel Silver seat.  I made the handle 7” long to accommodate the heavier rod, machined the insert out of Maple Burl and machined a Nickel Silver winding check to look like the older traditional stamped checks.  The rod will be complete shortly, but I wanted you to see how a customer's input effects a build.  I believe he hit the nail on the head with his outline. 

I and many custom builders greatly value customer input on any custom build.  Just give the rod outline a little thought and you and your builder can come up with exactly what you really want.

Until next time my friends,
Pete
Add Comment
 
 
Within the last year I have started machining my own wedding band reel seat hardware, along with turning all the reel seat inserts.   I use both Nickel Silver and Aluminum.   The weight difference between the Nickel Silver and Aluminum is quite noticeable.   If you are concerned about weight on a smaller rod, you might think about using an Aluminum seat.   As with any metal, Aluminum can oxidize over time.   The oxidization can be avoided by properly caring for your rod.   When you are done fishing for the day, wipe the entire rod down before you store it.   Then again, patina can give the rod a bit of personal character...... as in:  "I bought this rod to use and by golly I'm using it."

Eventually the plan is to become a Rodsmith and make the majority of the components in-house.   Along with the reel seats, the hope is to include machining the Nickel Silver ferrules for the Bamboo rods and making my own snake guides.   The guides will have the old school look and will not be chrome plated.

Below are a  couple of the seats and inserts that have come out of the shop.  The top seat is Aluminum with a Sycamore insert.  The bottom seat is  Nickel Silver with a stablized Maple Burl insert.
Until next time my friends, Merry Christmas
Pete
1 Comment
 
 
What should you look for in a custom rod builder?  First off check out web sites and there are plenty out there to choose from.  Find a builder with a style that fits your needs.  Once you find a builder that interest you, interview them.  Questions, questions, questions, get all your questions answered. You are hiring a builder for your custom rod build.  Get enough information to make an informed decision.  Ask for references.  Former customers are a great source of information.

There are some preliminary things you can do to help in the selection of your builder.  Have a rough outline of what you want in your custom rod.  Things like: Budget?  What kind of fishing do you plan on using the rod for? How about weight, length, number of sections, and rod action? What types of options do you want? Agate strippers, feather inlays, custom handle, reel seat insert, yada, yada, yada..... Having a rough outline can really assist the builder in knowing where to start.  Don't worry if you don't have things nailed down.  A good builder will ask the right questions to finalize the build before they start.

Questions to ask your prospective builder:
*   Cost?  Does the quote include everything? Shipping, taxes, insurance?
*  Delivery date? If they have a waiting list where would you fall and what is the estimated      delivery date.
*  Is there an inspection period after delivery?  A few days to inspect the workmanship and lawn cast the rod.  And no, it isn't a period for you to take the rod on a fishing trip.
*  Do you have the ability to perform the extras that I want?  For example, if you want a custom handle, can they do it?

Things you should expect:
*  To be heard.  You are paying good money to have your dream rod built.  The builder should listen to what you want and do their level best to provide it.
*  Communication.  If you ask for a status update, your builder should  provide status as often as you request it.
*  A deposit required to start the build.  This deposit can differ between builders.  Example: I require a deposit to cover the cost of the components and in the case of a bamboo build, the bamboo.  That deposit is refundable until I order the components or split the bamboo.  But, that is just my way of handling deposits.
*  Pay for changes.  If you start changing things after the build details are finalized expect to pay.  Example: If you want a custom handle made one way and then change the design, it will probably cost you extra.

From the builder's side: Builders put more time and effort into preliminary build details than most customers realize.  If you decide not to have them build a rod for you, please  communicate that to them.  I understand my style doesn't suit everybody's needs and I don't take it personally, but I would like to hear back even if the answer is no.

Until next time my friends,

Pete 

Add Comment